Full index
It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost which results in the high cost of cement. It therefore becomes imperative to bring… Continue Reading
This project work deals on the feasibility of transferring the Toe – To – Heel Air Injection (THAI) technology which is a new in-situ combustion method of heavy oil recovery from Alberta, Canada, where the technology has recorded success with high rate of recovery to South-West, Nigeria (Ondo state) for efficient heavy oil… Continue Reading
This research project was carried out principally for the production of liquid and vapourized perfumes from local raw materials. The local raw material were subjected to various processing conditions in order to obtain purified perfume. The methods generally used in this work include expression steam distillation and solvent extraction.… Continue Reading
This project is on the production of paint from the available materials. The first process involved was the sourcing of the available material which include calcium carbonate (dotonute) water etc. the next step is the proper production procedure. The same product patterns was employed while the production was valued with a view to obtain… Continue Reading
The sole aim of this research work is to produce a high quality of bar soaps and compare with detergent. The major aspects of this projects deals with quality control processes in the production of a high quality bar soaps. In soap production, cold process was used and this was found out to be the most effective means of production… Continue Reading
This work is aimed at the removal of hazardous gases and dust particles, air channeling etc. This work is aimed at achieving industrial waste control therein safe – guarding the immediate environment. Chapter one accounts for the introduction of the project. Chapter two involves literature review in the origin, types and alternative… Continue Reading
The need for an authentic and reliable report relating to the design and construction of 80cm x 70cm x 50cm mobile deep freezer is inevitable. It should be a top priority of every individual in order to avoid huge expenditure in purchase to foreign ones. Its for this reason that this report is written for the benefit of those who are… Continue Reading
The process involved in the design and fabrication of a creep material testing equipment ranges from carrying out the feasibility studies of the project to the designed and especially of ensuring its functionality. Since it is used in the testing of failure of material under loading, different engineering principles employed in the design… Continue Reading
This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to… Continue Reading
INTRODUCTION Retaining walls are structures used in providing stability for earth or materials where conditions dis allow the materials from summing its nature al slope or stability There are many factors affecting or militating against the stability of retaining walls. These includes the level of water table behind the wall, size of the base of… Continue Reading
INTRODUCTION This work was obligated to present in one. The fundamental and practical information in the filed of the comparative analysis of the strength of concrete made from various aggregate which may be useful to people involve in civil and structural engineering and particularly, those that found pleasure in the design and related structure.… Continue Reading
INTRODUCTION Communication means extending information form one person to another in a way in which it can be understood. Information and ideas in technical and scientific fields can very often be more easily communicated through sketching or instrument drawing and blueprint reading. Drawing involves describing the shape and size of an object.… Continue Reading
INTRODUCTION The purpose of a control system is to produce a desired output. This output is usually specified by a command input, and is often a function of time. For simple applications in well structured situations, to control, and the controller must have the capability of reacting to disturbance, changes in its environment, and new input… Continue Reading
The microbiological and organic pollutants characteristics of umuosoko stream in ikwuano local government area, Enugu state, Nigeria were carried out. Twenty water samples were collected from four different parts of the river. The pour plate technique was employed for the isolation of micro-organisms. Colonial morphology, Gram staining… Continue Reading
Poor market sanitation is a serious problem that has contributed to the spread of infectious diseases and environmental degradation in Nigeria. The study evaluated the level of awareness and practice of solid waste management and problem of waste disposal and management in Effurun market, a leading food stuff market in Uvwie LGA of Delta… Continue Reading
This study focuses on the impact of outsourcing on labour-management relations in the banking sector, with reference to Diamond bank plc, Onitsha. The study was designed to explore the human relations aspect of outsourcing, as a result of which the Social Exchange theory was applied as the theoretical framework for this study. The research seeks… Continue Reading
The end-of-course grades assigned by lecturers are intended to convey the level of achievement of each student in the class. These grades are used to make a multitude of decisions. Unless a sufficiently, accurate and efficient method is used for the grading, the grades are applied to convey misinformation and lead the decision- maker… Continue Reading
CHAPTER ONE GENERAL INRODUCTION INTRODUCTION This study of research work attempt to evaluate the role of small and medium scale enterprises in rural poverty reduction of Kano state, using tailoring services in sumaila local government as a case study it is well known that sumaila area in which the predominant economic activities have been… Continue Reading
Ludo (latin word “ludus” -'I play') is a board game for two to four players, in which the players race their four tokens from start to finish according to die rolls. Like other cross and circle games, Ludo is derived from the Indian game Pachisi , but simpler. The game and its variants are popular in many countries and under various names.… Continue Reading
CHAPTER ONE INTRODUCTION 1.1 BACKGROUND TO THE STUDY Product is a combination of tangible and intangible goods and services offers to a customer for sale. It is any idea, method, information, service or object created as a result of a process and serves a need or satisfies a want (Mazhar, Daud, Bhutto & Mubin, 2015) Consumers are very fond of new… Continue Reading
Ex-convict can be defined as someone that uses to be in prison, someone that has being convicted for a particular crime. Online ex-convict file maintenance system is an online system developed to manage and maintain the records of an ex-convict individual. This software will enhance the proper and accurate, management and maintenance of… Continue Reading
At the end of the Cold War, Africa was ravaged by conflicts in various regions and that required the intervention of ECOWAS to preserve her regional security. Several instruments were therefore established for the management of conflicts through the ECOWAS Revised Treaty (1993) and other protocols. However, there are problems with the… Continue Reading
The ectoparasitic infestation of free range domestic fowls were surveyed between August and November, 2014. A total of 105 ectoparasites belonging to four species of two genera were collected. These were made up of three lice and one ixodid tick. The percentage occurrence of these parasites are: Menacanthus stramineus (50.5%),… Continue Reading
This research examined the activities of the Boko Haram sect and how it has impeded the national security, economic, political and social matrix of the Nigerian polity. The research argued that the insurgence of the sect would continually be a national security challenge in-spite of the marginal lip-service of the government to curb the heinous… Continue Reading
This study was conducted to examine the fungi present in spoilt onion bulb. Five different sample of spoilt onion bulb were blended together and suspended in sterilized distilled water which was used to inoculate Sabouraud dextrose agar (SDA). Four different fungi were isolated from the sample and the morphological characteristics shows… Continue Reading